How to use Scratch & Swirl Remover

Prep the Surface:

  • Wash and dry the vehicle thoroughly.
  • Use a clay bar or iron remover if needed to remove surface contaminants.
  • Work in a shaded area on a cool, clean surface.
  • Mask off trim and rubber to prevent staining.

Apply Product:

  • Use a dual-action (DA) polisher or apply by hand with a foam or microfiber pad.
  • Add 3–4 small drops to the pad.
  • Work in 2′ x 2′ sections using overlapping crosshatch or circular motions.
  • Apply light to medium pressure and continue until the product becomes nearly invisible.

Buff and Finish:

  • Wipe away residue with a clean, dry microfiber towel.
  • Allow 24 hours before washing to ensure full cure.